For people studying for IT certifications

Actually remember the commands
in your cert's published objectives.

CLI Recall drills command-line syntax for networking, Linux, cloud and Git study, including CCNA, CompTIA Network+ and CompTIA Security+ topics — with typing drills, step-by-step labs, and realistic troubleshooting tickets that check what you type.

Start free See pricing
Free tier included · $10/month or $79/year for full access · Cancel anytime
Independent study tool — not affiliated with, endorsed by, or sponsored by Cisco, CompTIA or any other certification provider.

Check your command recall: take the free 2-minute CCNA or CompTIA Network+ practice quiz →

# Drill: configure an OSPF neighbor on R1
R1(config)# router ospf 1
R1(config-router)# network 10.0.0.0 0.0.0.255 area 0
✓ correct  (abbreviations like "conf t" and "int g0/0" also accepted)

# Ticket: "Users on VLAN 20 can't reach the gateway."
SW1# show ip interface brief
SW1# show vlan brief
✓ you found it: the SVI was shut down.
How it works

Three ways to make it stick

Recognizing a command on a flashcard isn't the same as typing it correctly under pressure. CLI Recall makes you produce the command.

[ drill ]

Typing drills

Type the real command from a plain-English prompt. It accepts valid abbreviations (conf t, int g0/0) just like the real CLI, and tells you exactly what was off.

[ walk ]

Step-by-step labs

Guided walkthroughs that build a full configuration one command at a time, so you learn the order things happen in, not just isolated commands.

[ ticket ]

Troubleshooting tickets

Realistic "something's broken" scenarios where you run the diagnostic commands to find the fault, the way you would on the job.

New: Network lab

Build it, cable it, break it, fix it

Drag routers, switches, PCs, IP phones and servers onto a canvas, connect them with the right cables, and configure them from simulated command lines. Practice in Cisco-style, Juniper-style or Ubiquiti-style syntax, then ping across the network you built.

The CLI Recall network lab: three routers running OSPF, a router console and a PC pinging across the network
Three routers with different command-line styles sharing OSPF routes. The lab is a study simulation, not vendor software.
[ topology ]

A live topology

Link lights go green, amber and red like the real thing: spanning tree listens and learns, ports shut down, cables have to match. Access, multilayer, distribution and core switches, routers, PCs, servers, printers and IP phones.

[ protocols ]

The topics you study

VLANs and trunks, voice VLANs, CDP and LLDP, spanning tree (with root, loop and BPDU guard), EtherChannel (layer 2 and layer 3), port security, DHCP snooping and ARP inspection, speed and duplex mismatches, router-on-a-stick, SVIs, HSRP, static and OSPF routing (longest match, administrative distance, floating static routes, equal-cost paths, DR and BDR elections that don't preempt, router IDs, network types), spine and leaf and three-tier designs, IPv6 with SLAAC and static routes, access lists, NAT and PAT, DHCP (servers, relays, and routers that get their own address by DHCP), DNS, NTP, syslog (levels and facilities) and SNMP (polling and traps, SNMPv3), wireless LANs (lightweight access points joining a controller over CAPWAP, WPA2-PSK and 802.1X WLANs, FlexConnect, channels, Wi-Fi laptops), Power over Ethernet, QoS (calls that break up on a busy WAN until you mark, trust and queue them), serial links, Telnet and SSH, login hardening, configuration backups over TFTP and FTP, AAA logins through TACACS+ and RADIUS servers, network automation with Ansible playbooks run from a Linux PC, and REST APIs with JSON (a network controller you drive with curl and jq), client IP settings on Windows-, macOS- and Linux-style computers, and subnetting with VLSM. Fifty-one starter labs come with tasks: ten are troubleshooting tickets (broken networks to fix with show and debug commands, with hints when you want them), and eleven teach Python for network engineers.

[ helper ]

See it, then fix it

Turn on the View layers to watch bundles, VLANs, spanning tree roles and OSPF areas drawn on the canvas. The Helper ticks off lab tasks as your configuration makes them true, asks questions the running simulation answers, and when something doesn't work, tells you what to configure next, with the commands: from cables and VLANs to NAT, access lists in the wrong order or facing the wrong way, SSH and IPv6. Once a lab works, ask the Helper to break something: it hides one fault for you to find, with hints if you need them. And under the output of a show command, one click explains what each column means, read off the output you just got. Type a command in the wrong mode and the console says which mode takes it, and a CCNA topic map lists the starter labs under each of Cisco's published exam topics, ticking off the ones you've practised.

[ python ]

Python for network engineers

Linux PCs in the lab run real Python 3. Eleven starter labs teach it from zero, in plain English for network engineers: variables and loops, subnetting with the ipaddress module, logging in to devices with netmiko, reading show output with TextFSM, pushing configuration, Jinja2 templates and YAML data, backing up and comparing configs, REST APIs with requests, and Python alongside Ansible. Your scripts talk to the lab's own routers and switches.

[ real devices ]

Bring your own images

Already run device images in EVE-NG, GNS3, Cisco Modeling Labs or containerlab? Start the small CLI Recall bridge on your computer and open their consoles right in the lab, next to your simulated devices. You host the images you're licensed to use; CLI Recall never hosts or provides device images.

[ together ]

Study together

Start a live session and share its code. Classmates join from their own browser, see every change as it happens, and each work in their own consoles. Sessions save, so you can pick up where you left off.

[ your labs ]

Keep and share your labs

Your lab stays in your browser between visits. With Pro, save labs to your account and open them on any computer, or export a lab file to hand to a classmate or instructor.

Free: labs of up to 4 devices, kept in your browser. Pro: up to 80 devices, saved labs, lab files and hosting live sessions. Joining a session only needs a free account.
Free: labs of up to 4 devices, kept in your browser. Pro: up to 80 devices, saved labs and lab files.
The lab simulates command lines and Ansible playbooks for study. It isn't affiliated with or endorsed by Cisco, Juniper Networks, Ubiquiti or Red Hat, includes no vendor software, and its output can differ from real equipment. Ansible® is a registered trademark of Red Hat, Inc.
Study by goal

Career paths

Not sure where to start? Follow a path toward the job you want. Each one bundles the tracks that role needs — so you learn in order, not at random.

Every path is included in one subscription — switch between them anytime.

What's covered

Built around published exam objectives

Tracks are organized around the command-line topics in each certification's published objectives, with drills, walkthroughs, and quick-reference answers.

free · CCNA: first two topics CCNA: all topics (Cisco IOS) CompTIA Network+ CompTIA Security+ Linux & Red Hat (for RHCSA study) Windows admin AWS CLI Docker & Kubernetes Git Wireshark Subnetting trainer

Certification names such as CCNA, CompTIA Network+ and CompTIA Security+ are used only to say which exam a track helps you study for. CLI Recall is not affiliated with, endorsed by, sponsored by, or approved by Cisco, CompTIA or any other certification provider, and it is not an authorized training partner. Drills, practice tests and tickets are original, written from publicly available exam objectives and vendor documentation — not actual exam questions — and they do not guarantee any exam result.

A look inside

See it in action

A typing drill checking a command
A typing drill — type the command, get instant feedback.
A step-by-step walkthrough
Step-by-step lab that builds a full configuration.
A troubleshooting ticket scenario
A troubleshooting ticket — diagnose and fix the fault.
The subnetting trainer
The subnetting trainer with generated practice problems.
Why it exists

Built by someone who needed it

CLI Recall started as a study tool for learning IT commands the hard way — by actually typing them, not just recognizing them on flashcards. Recognizing a command and producing it are two different skills, and typing builds the second. So CLI Recall makes you produce it: type the real command at a simulated prompt, find out exactly what was off, and drill it until it's automatic. No ads, no ad trackers, no fluff — just the commands, drilled by typing.

Pricing

Start free. Upgrade when you're ready.

One subscription unlocks every track. Subscriptions renew automatically until you cancel; cancel anytime from your account and keep access until the end of the period you paid for. Secure payments by Stripe.

Free
$0
No card required
  • First two networking topics (Cisco IOS)
  • Typing drills on free content
  • Network lab with up to 4 devices
  • The other tracks
  • Walkthroughs & tickets
Start free
Recommended
Pro — Monthly
$10 / month
Cancel anytime
  • Every track · 1,250+ commands
  • 120 walkthroughs & 90 troubleshooting tickets
  • Timed practice tests & weak-spot drills
  • Subnetting trainer
  • Network lab: 80 devices, saved labs, live sessions
  • Network lab: 80 devices, saved labs, lab files
  • Progress synced across devices
Subscribe
Pro — Yearly
$79 / year
Save 34% vs. monthly
  • Everything in Pro Monthly
  • Best value
  • Cancel anytime
Subscribe yearly
Questions

Good to know

What do I get for free?
The first two networking topics (Cisco IOS commands for CCNA study), including their typing drills, so you can see exactly how CLI Recall works before paying anything. No card required.
How does billing work?
Subscriptions are $10/month or $79/year and renew automatically until you cancel. Payments and receipts are handled securely by Stripe. You can cancel or manage billing anytime from your account page.
Does it accept command abbreviations?
Yes. Drills accept valid shorthand the same way a real CLI does — for example conf t for configure terminal — as long as the abbreviation is unambiguous in context.
Is this affiliated with Cisco, CompTIA, AWS, or any vendor?
No. CLI Recall is an independent study aid and is not affiliated with, endorsed by, sponsored by, or approved by Cisco, CompTIA, Red Hat, AWS, Juniper Networks, Ubiquiti or any other certification provider or vendor. Product and certification names are trademarks of their respective owners. Track names like CCNA, CompTIA Network+ and CompTIA Security+ only describe the exam a track helps you study for; they don't mean Cisco or CompTIA has reviewed or approved CLI Recall. CLI Recall does not contain actual exam questions and does not guarantee any exam result.
What is the network lab?
A network simulator in your browser. You place devices, connect them, and configure them from command lines that imitate the conventions of Cisco IOS, Juniper Junos and Ubiquiti EdgeOS/EdgeSwitch. It's a simulation written for studying: no vendor software, operating system images or firmware are included, it covers common certification topics rather than every feature, and its output can differ from real equipment. Commands for features it doesn't simulate yet say so.
Can I practice Ansible in the lab?
Yes. Add a Linux PC to your lab and set up SSH on your routers and switches, then write an inventory and playbooks in the PC's Text editor and run ansible-playbook from its Terminal. Playbooks log in to Cisco-style, Juniper-style and Ubiquiti-style devices over the lab's SSH and change their configurations. The lab simulates a subset of Ansible features for study (inventories, variables, loops, conditions, handlers, facts, check mode, and the common ios, junos and edgeos modules); it isn't the Ansible software. The “Ansible playbooks” starter lab is set up and ready to run.
Can I learn Python in the lab?
Yes. Linux PCs in the lab run real Python 3 (in your browser), and the "Python for network engineers" starter labs teach it from zero: print and variables first, then loops and dictionaries, subnetting with the ipaddress module, netmiko, TextFSM, Jinja2 and YAML, config backups, REST APIs with requests, and Python with Ansible. Lab versions of netmiko, paramiko and requests log in to the lab's own simulated devices, so you practice without any equipment.
Can I use real device images?
Yes, your own. Run images you're licensed to use in an emulator such as EVE-NG, GNS3, Cisco Modeling Labs or containerlab, start the CLI Recall bridge (one small Python file) on that computer, pair it with the lab, and open the devices' consoles in the lab. The bridge only listens on your own computer, only answers CLI Recall after you pair it, and only reaches the consoles you list. CLI Recall doesn't host, sell or provide device images, and the lab's Helper can't check real devices.
Can I share a lab with friends or a class?
Yes, as a file. A Pro member exports the lab from the lab's File menu and sends it on, and the others import it into their own lab. A free account opens labs of up to 4 devices.
Can I study with friends or a class?
Yes. A Pro member starts a live session from the lab and shares its code or invite link. Anyone signed in to CLI Recall can join with a free account. The host can make the session view-only, make a new code, or remove someone. Everyone in a session can see the lab and what's typed in its consoles, so don't type real passwords into lab devices.
Can I cancel?
Yes, anytime, from your account page. You keep access through the end of the period you've paid for.